LP097X02-SLA3

Liquid Crystal DisplayProduct SpecificationSPECIFICATION

FORAPPROVAL

(◆)Preliminary Specification()Final Specification

Title

CustomerMODEL

9.7\" XGA TFT LCD

SUPPLIER*MODELSuffix

LG Display Co., Ltd.LP097X02SLA3

*When you obtain standard approval,

please use the above model name without suffix

APPROVED BYSIGNATURE

APPROVED BYJ. K. Kim / S. Manager

SIGNATURE

/

REVIEWED BY

/

K. T. Moon / ManagerPREPARED BYH. H. Lee / Engineer

/

Please return 1 copy for your confirmation withyour signature and comments.

Product Engineering Dept.

LG Display Co., Ltd

Ver. 0.123. Apr. 20101 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationContentsNo

COVERCONTENTS

RECORD OF REVISIONS

1233-13-23-33-43-53-63-7 45677-17-288-18-29A

GENERAL DESCRIPTIONABSOLUTE MAXIMUM RATINGSELECTRICAL SPECIFICATIONSELECTRICAL CHARACTREISTICSINTERFACE CONNECTIONS

LVDS SIGNAL TIMING SPECIFICATIONSSIGNAL TIMING SPECIFICATIONSSIGNAL TIMING WAVEFORMSCOLOR INPUT DATA REFERNECEPOWER SEQUENCEOPTICAL SFECIFICATIONSMECHANICAL CHARACTERISTICSRELIABLITY

INTERNATIONAL STANDARDSSAFETYEMCPACKING

DESIGNATION OF LOT MARKPACKING FORMPRECAUTIONS

APPENDIX. Enhanced Extended Display Identification Data

232324262222131721678101011

ITEM

Page

12345

Ver. 0.123. Apr. 20102 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationRECORD OF REVISIONSRevision NoRevision Date

0.1

23. Apr. 2010

Page

-First Draft

Description

EDID ver

1.0

Ver. 0.123. Apr. 20103 / 28LP097X02

Liquid Crystal DisplayProduct Specification1. General Description

The LP097X02 is a Color Active Matrix Liquid Crystal Display with an integral LED backlight system. The matrix employs a-Si Thin Film Transistor as the active element. It is a transmissive type display operating in the normally Black mode. This TFT-LCD has 9.7 inches diagonally measured active display area with XGA resolution(1024 horizontal by 768 vertical pixel array). Each pixel is divided into Red, Green and Blue sub- pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus, presenting a palette of more than 262,144 colors.The LP097X02 has been designed to apply the interface method that enables low power, high speed, low EMI. The LP097X02 is intended to support applications where thin thickness, low power are critical factors and graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the LP097X02 characteristics provide an excellent flat display for office automation products such as Notebook PC.

1LVDS &TimingControlBlock1General FeaturesActive Screen SizeOutline DimensionPixel PitchPixel FormatColor DepthLuminance, WhitePower ConsumptionWeight

Display Operating ModeSurface Treatment

9.7 inches diagonal

210.53(H) ×166.53 (V) ×3.55(D, Max.) mm ※PCB area : 5.82(Max.)0.192 mm ×0.192 mm

1024 horiz. by 768 vert. Pixels RGB strip arrangement6-bit, 262,144 colors

400 cd/m2(Typ., @ILED =20mA)

Logic : 0.8W(typ.@Mosaic), Back Light : 2.1W (typ.@ ILED = 20mA)160g (Max.)

Transmissive mode, normally Black

Glare, Anti-reflective treatment of the front polarizer, 3H

CNUser connector PinVer. 0.1Gate DriverTFT-LCD Panel(1024 x 768)(LOG_B type)POWER BLOCK7681102430EDID BLOCKSource Driver CircuitLED Backlight Ass’y6LEDs X 6 strings

Control & DataPowerEDID signal & Power

23. Apr. 20104 / 28LP097X02

Liquid Crystal DisplayProduct Specification2. Absolute Maximum Ratings

The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.

Table 1. ABSOLUTE MAXIMUM RATINGS

Parameter

SymbolVCCTOPHSTHOPHST

ValuesMin-0.30-201010

Max4.050609090

UnitsVdc°C°C%RH%RH

Notesat 25 ±5°C

1111

Power Input VoltageOperating TemperatureStorage TemperatureOperating Ambient HumidityStorage Humidity

Note : 1. Temperature and relative humidity range are shown in the figure below.

Wet bulb temperature should be 39°C Max, and no condensation of water.

90%80%60

60%

Wet Bulb

Temperature [℃]

403020100

50

40%

Humidity[(%)RH]StorageOperation

20%10%

-20010

20304050

607080

Dry Bulb Temperature [℃]

Ver. 0.123. Apr. 20105 / 28LP097X02

Liquid Crystal DisplayProduct Specification3. Electrical Specifications3-1. Electrical Characteristics

The LP097X02 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input which powers the LED BL.

Table 2. ELECTRICAL CHARACTERISTICS

Parameter

MODULE :

Power Supply Input VoltagePower Supply Input CurrentPower ConsumptionDifferential ImpedanceLED Backlight :

(Without LED Driver)LED Driver input Volatge (on system)

Operating Current per stringPower ConsumptionLife Time

VLEDILEDPBL

10,0005

202.1-12252.6-VmAWattHrs

3456

ICC

VCCMosaicPcZm

3.0--90

3.32400.8100

3.62800.92110

VDCmAWattOhm

112

Symbol

Values

Min

Typ

Max

Unit

Notes

Note)

1. The specified current and power consumption are under the Vcc = 3.3V , 25℃, fv = 60Hz condition whereas Mosaic pattern is displayed and fv is the frame frequency.

2. This impedance value is needed to proper display and measured form LVDS Tx to the mating connector.3. LED input voltage must be input below than 12V to operate normally for LED Driver.

) in optical characteristics.4. The typical operating current is for the typical surface luminance (LWH

5. The LED power consumption shown above does not include power of external LED driver circuitfor typical current condition.

6. The life time is determined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current.

Ver. 0.123. Apr. 20106 / 28LP097X02

Liquid Crystal DisplayProduct Specification3-2. Interface Connections

This LCD employs two interface connections, a 30 pin connector is used for the module electronics interface and the other connector is used for the integral backlight system.

The electronics interface connector is a model 20474-030E-12 manufactured by I-PEX.

Table 3. MODULE CONNECTOR PIN CONFIGURATION (CN1)

Pin123456789101112131415161718192021222324252627282930Ver. 0.1SymbolGNDVCCVCCV EEDIDGSPClk EEDIDDATA EEDID

RIN0-RIN0+GNDRIN1-RIN1+GNDRIN2-RIN2+GNDCLKIN-CLKIN+GNDNCVdcVdcNCVdc1Vdc2Vdc3Vdc4Vdc5Vdc6NC

Ground

Power Supply, 3.3V Typ.Power Supply, 3.3V Typ.DDC 3.3V powerGSPDDC ClockDDC Data

Negative LVDS differential data inputPositive LVDS differential data inputGround

Negative LVDS differential data inputPositive LVDS differential data inputGround

Negative LVDS differential data inputPositive LVDS differential data inputGround

Negative LVDS differential clock inputPositive LVDS differential clock inputGroundNo ConnectionLED Anode (Positive)LED Anode (Positive)No ConnectionLED Cathode (Negative)LED Cathode (Negative)LED Cathode (Negative)LED Cathode (Negative)LED Cathode (Negative)LED Cathode (Negative)No Connection

23. Apr. 20107 / 281

30

DescriptionNotes

[LVDS Receiver]

SiliconWorks, SW0627B[Connector]

I-PEX 20474-030E–1#[Mating Connector]

I-PEX 20472-030T-10 seriesor equivalent (micro-coax type)

[Connector pin arrangement]LCD front view

LP097X02

Liquid Crystal DisplayProduct Specification3-3. LVDS Signal Timing Specifications3-3-1. DC Specification

DescriptionLVDS Differential VoltageLVDS Common mode VoltageLVDS Input Voltage RangeSymb ol||VID VCMVINMin1000.60.3Max6001.82.1UnitmVVVNotes---3-3-2. AC Specification

DescriptionSymboltSKEWMin-400-600-1/7--Max+ 400+ 600+ 1/7±3200UnitpspsTclk%KHzNotes85MHz > Fclk ≥65MHz65MHz > Fclk ≥25MHz---LVDS Clock to Data Skew MargintSKEWLVDS Clock to Clock Skew Margin (Even tSKEW_EOto Odd)Maximum deviation of input clock frequency during SSCMaximum modulation frequency of input clock during SSCFDEVFMODVer. 0.123. Apr. 20108 / 28LP097X02

Liquid Crystal DisplayProduct Specification< Clock skew margin between channel >

Freq.FmaxFcenter* FDEVFcenterFmin1FMODTime< Spread Spectrum >

3-3-3. Data Format-. LVDS 1 Port

RCLK+RA+/-RB+/-RC+/-RD+/-R3G4B5G7R2G3B4G6R1G2B3R7R0G1B2R6G0B1DEXR5B0R4G5R3G4B5G7R2G3B4G6R1G2B3R7R0G1B2R6G0B1DEXR5B0R4G5VSYNCHSYNCB7B6VSYNCHSYNCB7B6Previous(N-1)th CycleCurrent(Nth) CycleNext(N+1)th Cycle< LVDS Data Format >

Ver. 0.123. Apr. 20109 / 28LP097X02

Liquid Crystal DisplayProduct Specification3-4. Signal Timing Specifications

This is the signal timing required at the input of the User connector. All of the interface signal timing should be satisfied with the following specifications and specifications of LVDS Tx/Rx for its proper operation.

Table 6. TIMING TABLE

ITEMDCLK

FrequencyActive

Hsync

PeriodWidth-ActiveActive

Vsync

PeriodWidth-Active

Horizontal back porch

DataEnable

Horizontal front porchVertical back porchVertical front porch

Symbol

fCLK ThptWHtWHAtVPtWVtWVAtHBPtHFPtVBPtVFP

Min9710241960240768776340018041

Typ100.031024208432076880010480260616

Max10310242223400768824175603201232

tCLKtHPTclkUnitMHz

Note

tHP

3-5. Signal Timing Waveforms

Data Enable, Hsync, Vsync

High: 0.7VCCLow: 0.3VCC

Condition : VCC =3.3V

DCLKtCLK0.5 VccHsynctWHtHBPData EnabletHPtWHAtHFPtVPtWVVsynctVBPtWVAtVFPData EnableVer. 0.123. Apr. 201010 / 28LP097X02

Liquid Crystal DisplayProduct Specification3-6. Color Input Data Reference

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for thecolor ; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input.

Table 7. COLOR DATA REFERENCE

Input Color Data

Color

REDGREENBLUE

MSB LSBMSB LSBMSB LSB

R5 R4 R3 R2 R1 R0G5 G4 G3 G2 G1 G0B5 B4 B3 B2 B1 B0

BlackRedGreen

BasicColor

BlueCyanMagentaYellowWhiteRED (00) RED (01)

RED

…RED (62)RED (63)GREEN (00) GREEN (01)

GREEN

...GREEN (62)GREEN (63)BLUE (00) BLUE (01)

BLUE

…BLUE (62)BLUE (63)

0 0 0 0 0 00 0 0 0 0 00 0 0 0 0 01 1 1 1 1 10 0 0 0 0 00 0 0 0 0 00 0 0 0 0 01 1 1 1 1 10 0 0 0 0 00 0 0 0 0 00 0 0 0 0 01 1 1 1 1 10 0 0 0 0 01 1 1 1 1 11 1 1 1 1 11 1 1 1 1 10 0 0 0 0 01 1 1 1 1 11 1 1 1 1 11 1 1 1 1 10 0 0 0 0 01 1 1 1 1 11 1 1 1 1 11 1 1 1 1 10 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 10 0 0 0 0 00 0 0 0 0 0

…

…

…

1 1 1 1 1 00 0 0 0 0 00 0 0 0 0 01 1 1 1 1 10 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 10 0 0 0 0 0

…

…

…

0 0 0 0 0 01 1 1 1 1 00 0 0 0 0 00 0 0 0 0 01 1 1 1 1 10 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 1

…

…

…

0 0 0 0 0 00 0 0 0 0 01 1 1 1 1 00 0 0 0 0 00 0 0 0 0 01 1 1 1 1 1

Ver. 0.123. Apr. 201011 / 28LP097X02

Liquid Crystal DisplayProduct Specification3-7. Power Sequence

90%Power Supply For LCD

VCC

90%10%0V10%T1Interface Signal,

Vi

(LVDS Signal of Transmitter)

T2Valid DataT5T6T70VT3T4LAMP ONOFFLAMP Power

OFFTable 8. POWER SEQUENCE TABLE

Parameter

Min.

T1T2T3T4T5T6T7

0.5020020000400

ValueTyp.-------Max.1050--5010-(ms)(ms)(ms)(ms)(ms)(ms)(ms)Units

Note)

1. Valid Data is Data to meet “3-3. LVDS Signal Timing Specifications”2. Please avoid floating state of interface signal at invalid period.

3. When the interface signal is invalid, be sure to pull down the power supply for LCD VCC to 0V.4. Lamp power must be turn on after power supply for LCD and interface signal are valid.

Ver. 0.123. Apr. 201012 / 28LP097X02

Liquid Crystal DisplayProduct Specification4. Optical Specification

Optical characteristics are determined after the unit has been ‘ON’ and stable for approximately 20 minutes in a dark environment at 25°C. The values specified are at an approximate distance 50cm from the LCD surface at a viewing angle of Φand Θequal to 0°.

FIG. 1 presents additional information concerning the measurement equipment and method.

FIG. 1 Optical Characteristic Measurement Equipment and Method

Optical Stage(x,y)

LCD Module

Equipment

500mm±50mmTable 9. OPTICAL CHARACTERISTICS

ParameterAverage LuminanceLuminance variationC/RResponse timeViewingangleHorizontalVerticalSymbolLAVEδWHITE-ΘΘΘREDRYGXGREENColor CoordinatesBLUEBYWXWHITEWYCross TalkGray ScaleDSHA---GYBXCondition5 Points(ILED= 20mA)13 pointsCenter 1 Point-φx(Left,Right) φyu(Up) φyd(Down) RXTa=25°C, VCC=3.3V, fV=60Hz, fCLK = 100.03MHz, ILED = 20mAMin340-500-±808080Typ4001.460030±898989Max-1.6-50---˚5Unitscd/㎡%-㎳Notes23140.5740.3210.2910.5220.1220.1030.2830.299-0.6040.3510.3210.5520.1520.1330.3130.329-0.6340.3810.3510.5820.1820.1630.3430.3594.0%Fig.56Gamma 2.2Ver. 0.123. Apr. 201013 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationNote)

1. Contrast Ratio(CR) is defined mathematically as

Surface Luminance with all white pixels

Contrast Ratio =

Surface Luminance with all black pixels

2. Surface luminance is the average of 5 point across the LCD surface 50cm from the surface withall pixels displaying white. For more information see FIG 1.

LWH = Average(L1 ,L2 , … L5 )

3. The variation in surface luminance , The panel total variation (δWHITE ) is determined by measuring LN

at each test position 1 through 13 and then defined as followed numerical formula.For more information see FIG 2.

δWHITE =

Maximum(L1 ,L2 , … L13 ) Minimum(L1 ,L2 , … L13 )

4. Response time is the time required for the display to transition from white to black (rise time, TrR ) andfrom black to white(Decay Time, TrD ). For additional information see FIG 3.5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to theLCD surface. For more information see FIG 4.6. Gray scale specification

Gray Level

L0L7L15L23L31L39L47L55L63

Luminance [%] (Typ)

0.121.004.309.8019.234.253.574.5100

* fV = 60Hz

Ver. 0.123. Apr. 201014 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationFIG. 2 Luminance

H10mm6A723810mmH,V: ACTIVE AREA

BV914121051311A : H/4 mmB : V/4 mm

H : 196.608 mmV : 147.456 mmPOINTS: 13 POINTS

FIG. 3 Response TimeActive AreaThe response time is defined as the following figure and shall be measured by switching the input signal for “black” and “white”.

%10090

OpticalResponse

100

TrRTrD

whiteblackwhiteFIG. 4 Viewing angleNormalEye,Left Yφ = 90°, Upφ = 180°θφφ = 0°,Rightφ = 270°,DownVer. 0.123. Apr. 201015 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationFIG. 5 Cross talk

5. Mechanical Characteristics

The contents provide general mechanical characteristics for the model LP097X02. In addition the figuresin the next page are detailed mechanical drawing of the LCD.

Horizontal

Outline Dimension

VerticalThicknessHorizontal

Bezel Area

VerticalHorizontal

Active Display Area

Vertical

WeightSurface Treatment

160g (Max.)

Hard coating(3H), Glare treatment of the front Polarizer (Haze 0%)

147.456mm152.26mm196.608mm

210.53 ±0.50mm (without bracket length)166.53 ±0.50mm (without bracket length)3.55mm(Max.) ※PCB area : 5.82(Max.)201.40mm

Ver. 0.123. Apr. 201016 / 28LP097X02

Liquid Crystal DisplayProduct Specification

Ver. 0.123. Apr. 201017 / 28LP097X02

Liquid Crystal DisplayProduct Specification

Ver. 0.123. Apr. 201018 / 28LP097X02

Liquid Crystal DisplayProduct Specification6. Reliability

Environment test conditionNo.123456

Test Item

High temperature storage testLow temperature storage testHigh temperature operation testLow temperature operation testVibration test (non-operating)Shock test (non-operating)

Ta= 60°C, 240hTa= -20°C, 240hTa= 50°C, 50%RH, 240hTa= 0°C, 240h

Sine wave, 10 ~ 500 ~ 10Hz, 1.5G, 0.37oct/min3 axis, 1hour/axis

Half sine wave, 180G, 2ms

one shock of each six faces(I.e. run 180G 6msfor all six faces)

0 ~ 10,000 feet (3,048m) 24Hr0 ~ 40,000 feet (12,192m) 24Hr

Conditions

7

Altitude operating

storage / shipment

{ Result Evaluation Criteria }

There should be no change which might affect the practical display function when the display qualitytest is conducted under normal operating condition.

Ver. 0.123. Apr. 201019 / 28LP097X02

Liquid Crystal DisplayProduct Specification7. International Standards7-1. Safety

a) UL 60950-1:2003, First Edition, Underwriters Laboratories, Inc.,Standard for Safety of Information Technology Equipment.

b) CAN/CSA C22.2, No. 60950-1-03 1st Ed. April 1, 2003, Canadian Standards Association,Standard for Safety of Information Technology Equipment.c) EN 60950-1:2001, First Edition,

European Committee for Electrotechnical Standardization(CENELEC)European Standard for Safety of Information Technology Equipment.

7-2. EMC

a) ANSI C63.4 “Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electrical Equipment in the Range of 9kHZ to 40GHz. “American National Standards Institute(ANSI),1992

b) C.I.S.P.R “Limits and Methods of Measurement of Radio Interface Characteristics of InformationTechnology Equipment.“ International Special Committee on Radio Interference.

c) EN 55022 “Limits and Methods of Measurement of Radio Interface Characteristics of InformationTechnology Equipment.“ European Committee for Electrotechnical Standardization.(CENELEC), 1998( Including A1: 2000 )

Ver. 0.123. Apr. 201020 / 28LP097X02

Liquid Crystal DisplayProduct Specification8. Packing

8-1. Designation of Lot Mark

a) Lot Mark

A

B

C

D

E

F

G

H

I

J

K

L

M

A,B,C : SIZE(INCH) E : MONTH D : YEAR

F ~ M : SERIAL NO.

Note

1. YEAR

YearMark

20011

20022

20033

20044

20055

20066

20077

20088

20099

20100

2. MONTH

MonthMark

Jan1

Feb2

Mar3

Apr4

May5

Jun6

Jul7

Aug8

Sep9

OctA

NovB

DecC

b) Location of Lot Mark

Serial No. is printed on the label. The label is attached to the backside of the LCD module.This is subject to change without prior notice.

8-2. Packing Form

a) Package quantity in one box : 40 pcsb) Box Size : 365mm ×478mm ×328mm

Ver. 0.123. Apr. 201021 / 28LP097X02

Liquid Crystal DisplayProduct Specification9. PRECAUTIONS

Please pay attention to the followings when you use this TFT LCD module.

9-1. MOUNTING PRECAUTIONS

(1) You must mount a module using holes arranged in four corners or four sides.

(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to themodule. And the case on which a module is mounted should have sufficient strength so that external force is not transmitted directly to the module.

(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.Transparent protective plate should have sufficient strength in order to the resist external force.(4) You should adopt radiation structure to satisfy the temperature specification.

(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the formergenerates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction.

(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HBpencil lead. And please do not rub with dust clothes with chemical treatment.

Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimentalto the polarizer.)

(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause chemical damage to the polarizer.

(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes deformations and color fading.

(9) Do not open the case because inside circuits do not have sufficient strength.

9-2. OPERATING PRECAUTIONS

(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage : V=±200mV(Over and under shoot voltage)

(2) Response time depends on the temperature.(In lower temperature, it becomes longer.)(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.)

And in lower temperature, response time(required time that brightness is stable after turned on) becomeslonger.

(4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.

(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimized theinterference.

Ver. 0.123. Apr. 201022 / 28LP097X02

Liquid Crystal DisplayProduct Specification9-3. ELECTROSTATIC DISCHARGE CONTROL

Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.

9-4. PRECAUTIONS FOR STRONG LIGHT EXPOSURE

Strong light exposure causes degradation of polarizer and color filter.

9-5. STORAGE

When storing modules as spares for a long time, the following precautions are necessary.

(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature between 5°C and 35°C at normal humidity.

(2) The polarizer surface should not come in contact with any other object.

It is recommended that they be stored in the container in which they were shipped.

9-6. HANDLING PRECAUTIONS FOR PROTECTION FILM

(1) When the protection film is peeled off, static electricity is generated between the film and polarizer.This should be peeled off slowly and carefully by people who are electrically grounded and with wellion-blown equipment or in such a condition, etc.

(2) The protection film is attached to the polarizer with a small amount of glue. If some stress is appliedto rub the protection film against the polarizer during the time you peel off the film, the glue is apt toremain on the polarizer.

Please carefully peel off the protection film without rubbing it against the polarizer.

(3) When the module with protection film attached is stored for a long time, sometimes there remains avery small amount of glue still on the polarizer after the protection film is peeled off.

(4) You can remove the glue easily. When the glue remains on the polarizer surface or its vestige isrecognized, please wipe them off with absorbent cotton waste or other soft material like chamoissoaked with normal-hexane.

Ver. 0.123. Apr. 201023 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationAPPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 1/3

Byte#(decimal)01234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253Byte#(HEX)000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F202122232425262728292A2B2C2D2E2F303132333435Field Name and CommentsHeaderHeaderHeaderHeaderHeaderHeaderHeaderHeaderEISA manufacture code ( 3 Character ID ) EISA manufacture code (Compressed ASCⅡ)Panel Supplier Reserved - Product Code = K48(0x9cd3) ( Hex. LSB first )LCD Module Serial No - Preferred but Optional (\"0\" If not used)LCD Module Serial No - Preferred but Optional (\"0\" If not used)LCD Module Serial No - Preferred but Optional (\"0\" If not used)LCD Module Serial No - Preferred but Optional (\"0\" If not used)Week of Manufacture 00 weeksYear of Manufacture 2009 yearsEDID structure version # = 1EDID revision # = 3Video input Definition = Digital signalMax H image size (Rounded cm) = Max V image size (Rounded cm) = Display gamma = (gamma*100)-100 = Example:(2.2*100)-100=120Feature Support (no_DPMS, no_Active Off/Very Low Power, RGB color display, Timing BLK 1,no_ GTF)Red/Green Low Bits (RxRy/GxGy)Blue/White Low Bits (BxBy/WxWy)Red X Rx = 00Red Y Ry = 00Green X Gx = 00Green Y Gy = 00Blue X Bx = 00Blue Y By = 00White X Wx = 0.313White Y Wy = 0.329Established timing 1 (00h if not used)Established timing 2 (00h if not used)Manufacturer's timings (00h if not used)SMPL_MPPanel Vendor ID 0x97Low Order bits of Project ID_Auto-boot support(1)_Low Order 3 bits of Device Vendor IDHigh Order bits of Project ID_LCD Native Color_Black(1)_High Order 3 bits of Device Vendor ID0x000x000x000x000x000x000x000x00Operating frequency setting (54Mhz =0x36, 100Mhz =0x64)B/L Configuration(DY:0x, ROE:1x, HS:2x)(TG:x0, Nichia:x1)0x000x00Value(HEX)0FFFFFF001D0FFFFFF0603Value(binary)0000000011111111111111111111111111111111111111111111111100000000000001100001000011010011000000000000000000000000000000000000000000010011000000010000001110000000000101000000111101111000000010100000000000000101000000000000000000000000000000000000000000000000010100000101010000000000000000000000000010100000100101110110100100001001000000000000000000000000000000000000000000000000000000000000000001100100001000000000000000000000Header9C1001110000000000001008107031304F8AVender/Product IDEDID Version/RevisionDisplay Parameter00000000550500000004ColorCharacteristic00000A960079EstablishedTimings09000000000000000064200000StandardTiming IDVer. 0.123. Apr. 201024 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationAPPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 2/3

Byte#(decimal)54555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107Byte#(HEX)363738393A3B3C3D3E3F404142434445464748494A4B4C4D4E4F505152535455565758595A5B5C5D5E5F606162636465666768696A6BValue(HEX)Pixel Clock/10,000 (LSB) : 100Mhz 13Pixel Clock/10,000 (MSB) 27Horizontal Active (lower 8 bits) 1024pixel 00Horizontal Blanking(Thp-HA) (lower 8 bits) 1060pixel 24Horizontal Active / Horizontal Blanking(Thp-HA) (upper 4:4bits) 44Vertical Avtive 768line 00Vertical Blanking (Tvp-HA) (DE Blanking typ.for DE only panels) 32line 20Vertical Active : Vertical Blanking (Tvp-HA) (upper 4:4bits) 30Horizontal Sync. Offset (Thfp) 260pixel 04Horizontal Sync Pulse Width (HSPW) 320pixel 40Vertical Sync Offset(Tvfp) : Sync Width (VSPW) 16line/10line 0AHorizontal Vertical Sync Offset/Width (upper 2bits) 54Horizontal Image Size (mm) C5Vertical Image Size (mm) 94Horizontal Image Size / Vertical Image Size00Horizontal Border = 0 (Zero for Notebook LCD)00Vertical Border = 0 (Zero for Notebook LCD)00Non-Interlace, Normal display, no stereo, Digital Separate ( Vsync_NEG, Hsync_NEG )18Flag00Flag00Flag00Data Type Tag (Descriptor Defined by manufacturer ) 01Flag 00Descriptor Defined by manufacturer ( Apple EDID signature )06Descriptor Defined by manufacturer ( Apple EDID signature )10Descriptor Defined by manufacturer ( Link Type )30Descriptor Defined by manufacturer ( Pixel and link component format_6bit panel interface )00Descriptor Defined by manufacturer ( Panel feature_Inverter NA, no Inverter )00Descriptor Defined by manufacturer00Descriptor Defined by manufacturer00Descriptor Defined by manufacturer00Descriptor Defined by manufacturer00Descriptor Defined by manufacturer00Descriptor Defined by manufacturer00(If<13 char--> 0Ah, then terminate with ASCⅡ code 0Ah,set remaining char = 20h)0A(If<13 char--> 0Ah, then terminate with ASCⅡ code 0Ah,set remaining char = 20h)20Flag00Flag00Flag00Data Type Tag ( ASCII String ) FEFlag00L4CP50030939737X58030232-2DS53L4CA41333Field Name and CommentsValue(binary)000100110010011100000000001001000100010000000000001000000011000000000100010000000000101001010100110001011001010000000000000000000000000000011000000000000000000000000000000000010000000000000110000100000011000000000000000000000000000000000000000000000000000000000000000000000000101000100000000000000000000000000000111111100000000001001100010100000011000000111001001101110101100000110000001100100010110101010011010011000100000100110011TimingDescriptor#1TimingDescription#2TimingDescription#3Ver. 0.123. Apr. 201025 / 28LP097X02

Liquid Crystal DisplayProduct SpecificationAPPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 3/3

Byte#(decimal)108109110111112113114115116117118119120121122123124125126127Byte#(HEX)6C6D6E6F707172737475767778797A7B7C7D7E7FField Name and CommentsFlagFlagFlagData Type Tag ( ASCII String ) FlagColorSPACELCDLFSPACESPACESPACEExtension flag (# of optional 128 panel ID extension block to follow, Typ = 0)Check Sum (The 1-byte sum of all 128 bytes in this panel ID block shall = 0)Value(HEX)000000FE00436F6C6F72204C43440A202020006BValue(binary)0000000000000000000000001111111000000000010000110110111101101100011011110111001000100000010011000100001101000100000010100010000000100000001000000000000001101011TimingDescription#4Extension FlagChecksumVer. 0.123. Apr. 201026 / 28