如何在位win7下安装PROE2001
发布网友
发布时间：2022-04-20 19:08
共2个回答
热心网友
时间：2023-09-25 12:41
安装方法如下：
BIN文件夹下的PROE2001.BAT，在WIN7 位系统下会一闪而过，当使用中断命令观察窗口时，会发现CMD窗口的提示是无法识别处理器的架构，用记事本打开PROE2001.BAT，会发现以下字段
if "%PROCESSOR%" == "INTEL_" set MC=ia_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR%" == "MIPS_R4000" set MC=r4000_nt
if "%PROCESSOR%" == "Alpha_AXP" set MC=alpha_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA" set MC=ia_nt
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "MIPS" set MC=r4000_nt
if "%PROCESSOR_ARCHITECTURE%" == "ALPHA" set MC=alpha_nt
if not "%winbootdir%" == "" set mc=i486_win95
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=Alpha_AXP - For Windows NT Alpha based machines.
echo.
echo set PROCESSOR=MIPS_R4000 - For Windows NT MIPS based machines.
echo.
echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_ - For Windows Intel Itanium based machines.
echo.
echo set winbootdir=<boot dir> - For Windows 95/98 machines.
echo.
exit
:mc_done
其实绝大多数都是已经被淘汰的，需要进行编辑处理，将上述字段修改为如下：
if "%PROCESSOR%" == "INTEL_" set MC=ia_nt
if "%PROCESSOR%" == "INTEL_486" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "IA" set MC=ia_nt
if "%PROCESSOR_ARCHITECTURE%" == "AMD" set MC=i486_nt
if "%PROCESSOR_ARCHITECTURE%" == "x86" set MC=i486_nt
if not "%MC%" == "unset" goto mc_done
echo ERROR Cannot detect what machine type you have.
echo Please make one of the following settings:
echo.
echo set PROCESSOR=INTEL_486 - For Windows NT Intel based machines.
echo.
echo set PROCESSOR=INTEL_ - For Windows Intel Itanium based machines.
echo.
echo set PROCESSOR_ARCHITECTURE=AMD - For Windows AMD based machines.
echo.
exit
:mc_done
2.修改完保存退出，再双击，加载启动目录。
3.屏幕闪烁的话进入proe界面/选项/查找graphics/把值改为win32_gdi/然后确定/最后从启proe。
4.安装完成。
热心网友
时间：2023-09-25 12:41
我倒是没试过，不过我想弱弱问一句，好像proe2001没有位的，太古老了，估计没这个版本
