TI公司的两款数字音频接收芯片SRC4392和PCM9211做数字界面时谁的综合...
发布网友
发布时间：2022-04-25 03:33
共8个回答
热心网友
时间：2022-04-09 04:04
【SRC4392】
2 通道采样率转换器，具有数字音频接口接收器和发送器
SRC4392供应商：拍明芯城
描述
The SRC4392 is a highly-integrated CMOS device designed for use in professional and broadcast digital audio systems. The SRC4392 combines a high-performance, two-channel, asynchronous sample rate converter (SRC) with a digital audio interface receiver (DIR) and transmitter (DIT), two audio serial ports, and flexible distribution logic for interconnection of the function block data and clocks.
The DIR and DIT are compatible with the AES3, S/PDIF, IEC 60958, and EIAJ CP-1201 interface standards. The audio serial ports, DIT, and SRC may be operated at sampling rates up to 216kHz. The DIR lock range includes sampling rates from 20kHz to 216kHz.
The SRC4392 is configured using on-chip control registers and data buffers, which are accessed through either a 4-wire serial peripheral interface (SPI) port, or a 2-wire Philips I2C bus interface. Status registers provide access to a variety of flag and error bits, which are derived from the various function blocks. An open drain interrupt output pin is provided, and is supported by flexible interrupt reporting and mask options via control register settings. A master reset input pin is provided for initialization by a host processor or supervisory functions.
The SRC4392 requires a +1.8V core logic supply, in addition to a +3.3V supply for powering portions of the DIR, DIT, and line driver and receiver functions. A separate logic I/O supply supports operation from +1.65V to +3.6V, providing compatibility with low voltage logic interfaces typically found on digital signal processors and programmable logic devices. The SRC4392 is available in a QFN-40 and a lead-free, TQFP-48 package. The TQFN-48 is pin- and register-compatible with the Texas Instruments SRC4382 and DIX4192 procts.
特性
Two-Channel Asynchronous Sample Rate Converter (SRC)
Dynamic Range with –60dB Input (A-Weighted): 144dB typical
Total Harmonic Distortion and Noise (THD+N) with Full-Scale Input: –140dB typical
Supports Audio Input and Output Data Word Lengths Up to 24 Bits
Supports Input and Output Sampling Frequencies Up to 216kHz
Automatic Detection of the Input-to-Output Sampling Ratio
Wide Input-to-Output Conversion Range:
16:1 to 1:16 Continuous
Excellent Jitter Attenuation Characteristics
Digital De-Emphasis Filtering for 32kHz, 44.1kHz, and 48kHz Input Sampling Rates
Digital Output Attenuation and Mute Functions
Output Word Length Rection
Status Registers and Interrupt Generation for Sampling Ratio and Ready Flags
Digital Audio Interface Transmitter (DIT)
Supports Sampling Rates Up to 216kHz
Includes Differential Line Driver and
CMOS Buffered Outputs
Block-Sized Data Buffers for Both Channel Status and User Data
Status Registers and Interrupt Generation for Flag and Error Conditions
User-Selectable Serial Host Interface: SPI or Philips I2C™
Provides Access to On-Chip Registers and Data Buffers
U.S. Patent No. 7,262,716
Digital Audio Interface Receiver (DIR)
PLL Lock Range Includes Sampling Rates from 20kHz to 216kHz
Includes Four Differential Input Line Receivers and an Input Multiplexer
Bypass Multiplexer Routes Line Receiver Outputs to Line Driver and Buffer Outputs
Block-Sized Data Buffers for Both Channel Status and User Data
Automatic Detection of Non-PCM Audio Streams (DTS CD/LD and IEC 61937 formats)
Audio CD Q-Channel Sub-Code Decoding and Data Buffer
Status Registers and Interrupt Generation for Flag and Error Conditions
Low Jitter Recovered Clock Output
Two Audio Serial Ports (Ports A and B)
Synchronous Serial Interface to External Signal Processors, Data Converters, and Logic
Slave or Master Mode Operation with Sampling Rates up to 216kHz
Supports Left-Justified, Right-Justified, and Philips I2S™ Data Formats
Supports Audio Data Word Lengths Up to
24 Bits
Four General-Purpose Digital Outputs
Multifunction Programmable Via Control Registers
Extensive Power-Down Support
Functional Blocks May Be Disabled Indivially When Not In Use
Operates From +1.8V Core and +3.3V I/O Power Supplies
Packages:
QFN-40
Small TQFP-48 Package, Compatible with the SRC4382 and DIX4192
【PCM9211】
具有立体声 ADC 和路由的 216kHz 数字音频接口收发器 (DIX)
PCM9211供应商：拍明芯城
描述
PCM9211 是一个完整的模拟和数字前端，适用于当今的多媒体播放器、条形音箱和录音机。
PCM9211 集成了立体声 ADC、S/PDIF 收发器（具有多达 12 个多路复用输入）和 3 个 PCM 输入，这些 PCM输入支持对其他音频接收器进行多路复用且提供到数字信号处理器的模拟和 S/PDIF 信号。此外，PCM9211 还有两个用于符合 HDMI 2.1 eARC 标准的帧的专用输入通道。
特性
集成了 DIX、ADC和信号路由：
异步运行（DIR、DIT、ADC）
多路复用器和 PCM数据路由：
I2S、左平衡、右平衡
通用输入/输出引脚
数字音频接口接收器 (DIR)：
24 位，可支持 216kHz的频率
50ps 超低抖动
非 PCM检测（IEC61937、DTS-CD/LD）
12 个 S/PDIF 输入端口：
2 个同轴 S/PDIF输入
符合 HDMI 2.1 eARC 标准
10 个光纤 S/PDIF输入
数字音频接口发送器 (DIT)：
24 位，可支持 216kHz 的频率
24位数据长度
48 位通道状态缓冲器
同步和异步运行
模数转换器 (ADC)：
24 位，可支持 96kHz的频率
动态范围：101dB (fS =96kHz)
同步/异步运行
路由功能：
输入：3 个 PCM、1 个 DIR、1 个 ADC
输出：主输出、辅助输出、DIT
多通道（8 通道）PCM路由
其他功能 特性：
断电（引脚和寄存器控制）
PCM端口采样频率计数器
GPIO 和 GPO
适用于外部晶体的 OSC (24.576MHz)
SPI、I2C或硬件控制模式
电源：
3.3V（2.9V 至 3.6V）DIX 全数字电源
5V（4.5V 至5.5V）ADC 模拟电源
运行温度范围：-40°C 至 +85°C
封装：48 引脚 LQFP
热心网友
时间：2022-04-09 05:22
click to collapse contents
集成了 DIX、ADC和信号路由：
异步运行（DIR、DIT、ADC）
多路复用器和 PCM数据路由：
I2S、左平衡、右平衡
通用输入/输出引脚
数字音频接口接收器 (DIR)：
24 位，可支持 216kHz的频率
50ps 超低抖动
非 PCM检测（IEC61937、DTS-CD/LD）
12 个 S/PDIF 输入端口：
2 个同轴 S/PDIF输入
符合 HDMI 2.1 eARC 标准
10 个光纤 S/PDIF输入
数字音频接口发送器 (DIT)：
24 位，可支持 216kHz 的频率
24位数据长度
48 位通道状态缓冲器
同步和异步运行
模数转换器 (ADC)：
24 位，可支持 96kHz的频率
动态范围：101dB (fS =96kHz)
同步/异步运行
路由功能：
输入：3 个 PCM、1 个 DIR、1 个ADC
输出：主输出、辅助输出、DIT
多通道（8 通道）PCM路由
其他功能 特性：
断电（引脚和寄存器控制）
PCM端口采样频率计数器
GPIO 和 GPO
适用于外部晶体的 OSC(24.576MHz)
SPI、I2C或硬件控制模式
电源：
3.3V（2.9V 至 3.6V）DIX 全数字电源
5V（4.5V 至5.5V）ADC 模拟电源
运行温度范围：-40°C 至 +85°C
封装：48 引脚 LQFP
热心网友
时间：2022-04-09 06:57
什么年代了
热心网友
时间：2022-04-09 08:48
v的VB想
热心网友
时间：2022-04-09 10:56
pcm9211
热心网友
时间：2022-04-09 13:21
我觉得是适合自己的就是最好的。
热心网友
时间：2022-04-09 16:02
手机游戏*得概率不大，通常情况下是在0.01‰到0.0015‰
热心网友
时间：2022-04-09 19:00
在都什么年代了，家里就那个一个两个宝贝的，还存在什么奶奶和姥姥，都是孩子他奶奶我是你爸爸
